EasyCAM Sewer Camera Repair Kit for SL150 and SL200

Keep Your SL150 or SL200 Running

Running larger diameter lines with SL150 or SL200? When a component fails, you can't afford to wait.

The EC-RK-LG Repair Kit is built for high-volume inspection operations. Keep it on the truck. When something wears out, swap it and keep working.

What's Inside the EC-RK-LG

The complete repair kit for SL150 and SL200 systems includes:

• Full-color self-leveling camera head
• 512Hz sonde transmitter
• Camera skid
• Battery pack
• Cables
• Tools
• EC-RT-LG re-termination kit (for cable repairs)

Built for Heavy Use

If you're running SL150 or SL200 systems, you're probably handling higher volume. That means more wear. That means components eventually need replacing.

The EC-RK-LG gives you everything you need to keep that system working without downtime. Camera head worn out? Swap it. Transmitter acting up? Replace it. Cable damaged? Re-terminate it.

All in the field. All with the tools you have.

What This Means

For high-volume inspection crews: this kit is your backup plan. You never shut down because of a failed component.

Your customers stay scheduled. Your crew stays productive. Your reputation for reliability stays solid.

Made in the USA

Every certified EasyCAM replacement part inside. Built to the same standard as your original system.

The Specs

• Compatible with: EasyCAM SL150 (150 ft) and SL200(200 ft) systems
• Includes: Camera head, transmitter, skid, battery, cables, tools, re-termination kit
• Installation: Field-repairable with common hand tools
• Made: USA

EC-RK-LG Frequently Asked Questions

Will the EC-RK-LG work with both SL150 and SL200?
Yes. The kit is sized for both the SL150 and SL200 systems. They use the same components and cable sizes.

I have an SL125. Can I use this kit?
No. The SL125 uses the EC-RK-MED kit. Make sure you order the correct size for your system.

Can I swap components without specialized training?
Yes. Every component in the kit is designed for user installation. Common hand tools, clear instructions, no special expertise needed.

What if I only need one component, not the entire kit?
You can order individual replacement components. Contact EasyCAM Customer Support to learn about component-only options.

How quickly can I get my system back to full operation?
Most component swaps take 15–30 minutes for camera heads and transmitters. Cable re-termination (if needed) takes under an hour. You can usually be back to inspections the same day.

Are the batteries in the kit pre-charged?
Yes. The kit includes a brand new battery pack.